co-mingled-sorting-plant-thumb

Case Study – Co-Mingled Sorting Plant

Specification:

Static Feed Hopper

Hopper consists of:

  • 1.8m wide X 4.3m long and is fabricated from 6mm thick steel Lined with 8mm plate, with a capacity of 4 cubic meters.

Inclined Oversize Conveyor

  • 1500mm wide x 12.5m long conveyor.

10 Bay Picking Station No 1

  • The overall length of the Horizontal section of the conveyor is 32.5m long x 1500mm wide
  • The conveyor runs flush with the main structure allowing material to be safely and easily disposed of to each of the 20 outlet chutes 2.5m X 450mm

823 Static Trommel Drum

The Rotary Trommel consists of:

  • A 2.44 diameter x 7m long Drum. The inlet and discharge rings are made from 12mm thick steel plate Drum fitted with 50mm punch plates.
  • Four large solid rubber tires connected to individual 7.5kW. Electric motors through reduction gear box to drive the Trommel.
  • One solid rubber tire provides thrust support for the drum.

Four Bay Picking Station No 2

  • Horizontal section is designed that the conveyor belt is 1200mm wide x 18m long and runs flush with the main structure allowing material to be safely and easily disposed of to each of the eight outlet chutes 1500mm x 500mm

Three Bay Picking Station No 3

  • Horizontal section is designed that the conveyor belt is 1200mm wide x 19.2m long and runs flush with the main structure allowing material to be safely and easily disposed of to each of the eight outlet chutes 1500mm x 500mm

Electrical Control Panel wiring on site

  • Fitted with sequence start up and shut down
  • Remote control panel in the Picking Station to control the complete system

Safety

  • Nip Point Guarding
  • External Belt Adjustment points
  • Emergency Stops
  • Fully Guarded to Health & Safety Legislation

Further information Available on Request