Latest Video



Get the Flash Player to see this player.

Query Form

Have a query? Send us a quick message and we'll get back to you soon.





Waste Picking Station PDF Print E-mail

Waste Picking Station

Plant installed – October 2009

Plant Processing- Construction and Demolition, Commercial and industrial waste.

 

Plant Consists of:

823 Static Trommel

Feed Hopper

  • 4m long X 2.2m Wide and is fabricated from 6mm thick steel plate.
  • 1350mm wide belt conveyor.
  • Feeder drive Variable Speed Control.

Drum

  • A 2.44 diameter x 7m long Drum.  The inlet and discharge rings are made from 12mm thick steel plate Drum fitted with 40mm punch plates.  
  • Four large solid rubber tires connected to individual 7.5kW electric motors through reduction gear box to drive the Trommel.
  • One solid rubber tire provides thrust support for the drum.
  • Trommel is fitted with variable speed control

Incline Oversize Conveyor

  • 1200mm wide x 7.5m long the conveyor is fitted with impact bars under feed boot

 

5 Bay Picking Station

  •  Picking conveyor belt is 1200mm wide x 29.2m long and runs flush with the main structure allowing material to be safely and easily disposed of to each of the ten outlet chutes 1500mm x 450mm
  • Impact bed under feed boot
  • Bay dimensions 3.5m wide x 3.5m high with suitable bracing mountings on existing RSJ uprights.
  • Bays are lined with 8mm plate
  • Variable speed control is mounted facing discharge side of the screen area giving the operator a full view of the material on the conveyor.
  • Walk ways on both sides of the picking station with two-incline access ladders at the front of the station complete with handrails.
  • Drive consists of Gear box and Variable speed

Enviro Cabin

  • A steel clad  double skinned cabin with wall insulation to reduce noise and dust levels
  • Mounted the full length of the picking station complete with 4 off  glazed windows.   
  • 3 off access doors with plastic flaps at entrance and  discharge end of picking belt
  • Suitable lighting and heating installed
  • 4.5 metre wide cabin with extra wide walkway

Over – Band Magnet

  • The over band magnet is fitted on the 6th bay after cabin of the o/size conveyor with adjustable stainless steel shackle supports.
  • Complete with 3KW electric motor drive.
  • The magnet is approximately 300mm above the picking station.

Air Knife Separator

  • The Air Knife separator is fitted with 11 KW electric motor direct drive mounted on a support structure on the end of the conveyor.
  • 300mm diameter outlet from the air knife into tapered nozzle 800mm w x 75mm with adjustable angle.
  • Ducting from airknife to covered bin.

Electrical Control Panel

  • Fitted with sequence start up and shut down.
  • Fitted with variable speed drives for control and economic running.
  • Remote control panel in the Picking Station to control the feeder and drum.